Skip to content
Apply Promo Code: 3OFF to Enjoy 3% Off on All Products (Exclude Massage Chairs)
Apply Promo Code: 3OFF to Enjoy 3% Off on All Products (Exclude Massage Chairs)

Panasonic SOLID SHINE PT-RZ470UK 1-Chip DLP Projector

Original price $3,518.61 - Original price $3,518.61
Original price
$3,518.61 - $3,518.61
Current price $3,518.61

PT-RZ470UK DLP Projector Power Cord with Secure Lock Wireless Remote Control Unit Batteries for Remote Control Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software).


Product Selection


Contact Information


Review Information

Panasonic SOLID SHINE PT-RZ470UK 1-Chip DLP Projector

Enter the details below to request your custom quote in just a few minutes

Our Customers & Partners


The black SOLID SHINE PT-RZ470UK 1-Chip DLP Projector from Panasonic is free from lamps or air filters, so that you enjoy maintenance-free use for about20,000 hours while maintaining high brightness and picture quality. To enhance permanent installation use, the DIGITAL LINK support has been added,allowing you to transmit video, audio, and control signals up to 328 (100m) over a single LAN cable. This LED/Laser projector features a 2x zoom and awide lens shift range, thus providing flexibility for easy first time and replacement installations. It is loaded with features for professionalintegration, such as Portrait mode, a Multi Screen Support System, and 3D projection. The Full HD PT-RZ470UK Projector expands projection capabilities inmuseums, digital signage, and more.

Bright Picture Quality for a Long Period of Time
The projector features 3500 lumens of brightness. Rate of brightness deterioration in the LED/Laser-combined light source is extremely slowcompared to lamp based projectors. The SOLID SHINE drive uses a built-in sensor to constantly detect the light intensity of the light source andcorrect corresponding changes in white balance. This all helps to maintain picture quality for a long period of time. Contrast ratio is 20,000:1,and images are reproduced with a wide dynamic range
The LED/Laser-Combined Light Source Enables Approximately 20,000 Hours of Continuous Operation
This light source requires no maintenance for approximately 20,000 hours. In many cases, this means no maintenance until your next refresh cycle.Naturally, there are no lamp burnout problems during use, so reliability is further increased. There is also no filter to clean due to carefullyengineered sealed optics. As a consequence, running cost is dramatically lowered because of the savings on lamp costs, maintenance labor and hassleof stocking lamps
30x Drive Switching Prevents Color Breaking
In a 1-chip DLP system projectors with conventional lamp, a color wheel is used for time-division multiplexing in a method where the human eyecombines the result to achieve a full-color palette. In the projector, this is done by on/off switching of the LED/Laser-combined light source. APanasonic power supply circuit provides time-division multiplexing
Heat Pipe Cooling System Maintains Stable Operation up to 113F (45C)
Laser cooling is performed by releasing the heat to cooling fins, then cooling with a heat pipe cooling system. This suppresses temperature risesinside the projector and allows stable operation up to an ambient temperature of 45C (113F). The use of this heat pipe cooled system alsoachieves quiet operation of 29 dB, enabling viewers to concentrate on the presentation or on quiet movie scenes
Dust-Resistant Structure with an Airtight Optical Block
The area between the LED/Laser to the DLP chip and prism is hermetically sealed to form an airtight structure for the optical block, the heart ofthe projector. This resists the effects of dust and other particles in the air, and enables use of the projector in a wide range of environments
DICOM Simulation Mode
This imaging mode is similar to DICOM part 14, which is a medical imaging standard. It reproduces X-ray images
Easy Remote Monitoring and Control Over a LAN
Web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messagingfunction can also notify you the overall projector status. In addition, Multi-Projector Monitoring and Control Software Ver. 2.8 is available formonitoring and controlling multiple Panasonic projectors from a single PC. The wired LAN terminal is compatible with PJLink (class 1), an openprotocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors
Horizontal/Vertical Lens Shift
The wide shift range accommodates various room sizes and shapes. When lights or ventilation holes are located in the ceiling mounting site, you cansimply relocate the projector to avoid them
Flexible 360-Degree Installation
The projectors can be rotated vertically. This means you can install one at any up-and-down angle you want, to accommodate different installationconditions
The Daylight View Basic Ensures Clear Images Even in Brightly Lit Rooms
It achieves sharp, easy-to-see images by reproducing the details in dark image areas, which were previously difficult to see in brightly lit rooms.A built-in sensor measures the ambient light, and the Daylight View Basic function adjusts the halftone color and brightness level according to thesurrounding illumination
Rec. 709 Mode for HDTV Projection
Optimal color reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709, when images from an HDTV source areprojected
First-Time and Replacement Installations
2x Zoom Lens: For a 120" (3 m) diagonal widescreen, the projection distance extends from approximately 12.8' (3.9 m) to approximately 25.7' (7.8 m)
Lens-Centered Design
A lens-centered, symmetrical design provides ease of installation, eliminating the need for any special considerations when planning theinstallation site
Compatible with Crestron RoomView
The LAN terminal allows a computer connected to the network to use Crestron RoomView application software to manage and control system devices
Image Appears Immediately-No Need for Cooling After Use
Images do not appear quickly with lamp-based projectors because the projector requires time to warm up. With this projector, the image appearsalmost instantly. There's also no cooling time required when turning the power off, so you can quickly turn the projector on and off as many timesas needed
24/7 Operation
Ordinary lamps are not well suited to continuous operation. Because the projector does not use a lamp, has efficient cooling system and uses DLPchip that has a long life, they are capable of 24/7 operation
Scheduling Function
Scheduled operation is possible using the built-in timer function, without having to use a PC and software
Effective Theft Prevention
You can change the default Panasonic start up logo to any logo you want. A new logo can be easily uploaded by connecting a computer to theprojector through the LAN or serial connection by using the Logo Transfer Software. Other security measures include, a security bar, key lock, andsecurity password. This is very effective for preventing theft
49' (15 m) Range Remote Control
A unique ID number can be assigned to each projector using the supplied wireless remote control unit. This allows operation of a desired projectorwhen multiple units are set up at the same location. Three frequently used functions can be assigned to the function buttons for instant recall
Eco Management Functions
A number of functions are provided to reduce power consumption. You can easily set the eco management functions according to operating conditionsby using the eco button on the remote control
Ecology-Conscious Design
Lamp-free (no mercury)
Low heat dissipation
RoHS directive compliant
No halogenated flame retardants are used in the cabinet
Non-coated cabinet for easy recycling
Lead-free glass is used for the lens
Light source mode is selectable to reduce power consumption
Eco button on the remote control is used for setting up the eco management functions
Standby power consumption of only 0.5W has been achieved
An auto off timer switches the projector to standby mode when no input signal is received for a preset time

Item Includes

Panasonic SOLID SHINE PT-RZ470UK 1-Chip DLP Projector (Black)
  • Power Cord With Secure Lock
  • Wireless Remote Control Unit
  • 2 x R6/LR6/AA Type Battery For Remote Control
  • Software
  • 1 Year Limited Warranty
  • Item Includes

    Image Display
    Display System1-Chip 0.65" / 16.51 mm DLP
    Native Resolution1920 x 1080
    Supported ResolutionsNot Specified By Manufacturer
    BrightnessNormal Mode: 3500 Lumens1
    Please Note:

    Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

    Projection AngleNot Specified By Manufacturer
    Please Note:

    Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

    Aspect Ratio16:9
    Contrast Ratio20000:13
    Please Note:

    Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

    Color RangeNot Specified By Manufacturer
    LensF 2.0 - 3.4 (f = 21.5 - 43.0 mm)
    Lens ShiftNot Specified By Manufacturer
    Throw DistanceNot Specified By Manufacturer
    Throw Ratio1.46 - 2.94:1
    Projection Size40 - 300" / 1016.00 - 7620.00 mm
    Keystone Correction 40
    Ceiling MountableYes
    Rear Screen ProjectionYes
    Input/Output Connectors
    Inputs/Outputs1x 15-pin VGA Video (Input)
    1x DisplayPort Video (Input)
    1x HDMI Audio/Video (Input)
    1x 9-pin VGA Control (Input)
    1x M3 Audio (Output)
    1x M3 Audio (Input)
    1x Ethernet LAN (Input)
    Maximum Pixel Clock162 MHz
    Remote ControlYes
    Power RequirementsNot Specified By Manufacturer
    Power ConsumptionNormal Mode: 460W
    32 to 113F (0 to 45C)
    Humidity: 20 - 80%
    Dimensions (WxHxD)17.9 x 5.4 x 16.3" / 454.7 x 137.2 x 414.0 mm4
    Please Note:

    With legs at shortest position.

    Weight23.4 lb / 10.61 kg5
    Please Note:

    Average value. May differ depending on the actual unit.