Skip to content
Apply Promo Code: 3OFF to Enjoy 3% Off on All Products (Exclude Massage Chairs)
Apply Promo Code: 3OFF to Enjoy 3% Off on All Products (Exclude Massage Chairs)
BenQ MX822ST XGA Multi-Region 3D Ready DLP Projector

BenQ MX822ST XGA Multi-Region 3D Ready DLP Projector

SKU MX822ST
Save 5% Save 5%
$1,286.00
$1,286.00 - $1,286.00
$1,286.00
$1,216.87
$1,216.87 - $1,216.87
$1,216.87
  • XGA 1024 x 768 Native Resolution
  • Brightness of 3500 ANSI Lumens
  • High 13,000:1 Contrast Ratio
  • Long Lamp Life up to 3500 Hours
  • Short Throw Distance
  • Supports Various 3D Formats
  • SmartEco Technology & Eco Blank Mode
  • 3rd Generation PointDraw Technology
  • LAN Control with Crestron & PJ-Link
  • NTSC, PAL & SECAM Video Compatibility

STEP 1

Product Selection

STEP 2

Contact Information

STEP 3

Review Information

BenQ MX822ST XGA Multi-Region 3D Ready DLP Projector

Enter the details below to request your custom quote in just a few minutes

Our Customers & Partners

Features

TheBenQ MX822ST XGA Multi-Region 3D Ready DLP Projectoris designed for teaching and presentations in a variety of settings including classrooms and conference rooms. It provides 3500 ANSI lumens of brightness with a low noise level of only 38 dBA in Eco-Mode. It features a sharp 13,000:1 contrast ratio, 3D capabilities and XGA 1024 x 768 native resolution. The projector is powered by a DLP chip system and the lamp features a long life up to 3500 hours. The MX822ST is equipped with SmartEco Technology as well, which combines optimum levels of brightness and picture quality for maximum energy savings and a lower overall cost of ownership.

The projector features a variety of connection options including an HDMI input. It also offers a No Source Detected Mode, which will automatically lower the projector lamp brightness to 30% after it has remained unconnected for three minutes. Other features include a built-in 20W stereo speaker system, 3rd generation PointDraw Technology with Multi-Device Collaboration Mode and a low <0.5W standby power consumption level. The MX822ST supports ecoFACTS environmentally friendly packaging as well.

SmartEco Technology
SmartEco Technology is an innovative and environmentally friendly solution that enhances the energy saving capabilities of your projector's DLP system. It strikes an optimized balance between picture quality, brightness and energy efficiency. This allows students and teachers to get the most out of their classroom experience, while also helping the school by extending lamp life, minimizing maintenance and reducing the projector's total cost of ownership.
Eco Blank Mode
Eco Blank Mode allows teachers to blank the projection screen whenever they need to direct their students' focus back on them - or simply when the projector is not in use. When activated, this useful feature will dim the lamp power automatically, which can reduce the projector's overall power consumption by as much as 70%.
No Source Detected Mode
In the classroom, there will be times when the projector is turned on without a DVD player, computer or other display source connected. In order to reduce the amount of power wasted in these instances, BenQ created the No Source Detected Mode. It works by lowering the lamp brightness down to 30% after the projector has remained unconnected to a display source for more than three minutes.
Ultra-High Contrast Ratio
An ultra-high 13,000:1 contrast ratio projects sharp images, even for high brightness projectors. The result is better contrast and blacker blacks.
<0.5W in Standby Mode
When inactive, the MX822ST complies with 2013 EU standards by keeping power consumption to a minimum with <0.5W standby power. This technological advancement in energy saving helps extend the projector lamp life, while also lowering energy costs.
3rd Generation PointDraw Technology with Multi-Device Collaboration Mode
BenQ promotes classroom collaboration as well as teacher-student and student-student interaction by facilitating a diverse learning environment that fosters all learners. Its latest creation, the 3rd generation PointDraw technology, improves teaching and learning. It also provides additional support for multi-device collaboration. With simultaneous teacher-student interaction, students can take turn making their contribution to the lesson under the teacher's complete guidance and control.
Blu-ray Full HD 3D Supported
The MX822ST is built with DLP technology that supports 3D functionality, allowing schools to bring an immersive learning experience to their students with a simple preparation of 3D glasses (sold separately) and 3D content from your Blu-ray player.
3D Capability Improvement
Research has shown a 46% increase in student engagement and a 34% increase in test scores with the use of DLP 3D projection. The MX822ST supports HDMI, designed to maximize your audiovisual enjoyment with the capacity to pass two simultaneous 1080p signals with one connection.
Supports Various 3D Formats
The 3D formats supported by the MX822ST are 3D field-sequential, 3D frame packing, 3D top-and-bottom and 3D side-by-side.
Zero Eye-Blinding Lights
The short throw projection distance keeps the projector light from shining directly into your eyes, allowing you to keep your focus on your audience.
Zero Disruptions
With a projection distance this close, you and your audience can move freely without worrying about obstructions between the projector and the screen.
LAN Control with Crestron & PJ-Link
LAN Control is designed to help IT managers perform day-to-day projector maintenance and repair tasks efficiently and effectively - offering them full access and control over every projector directly from their workstations. The MX822ST provides seamless support for the Crestron and PJ-Link LAN Control system as well.
LAN Display
LAN Display offers a cost-effective solution for projector implementation management using a single LAN cable to control and display. This feature also offers simultaneous 4-1 or partial projection display option for better content management for discussions, presentations, training and classroom teaching.
ecoFACTS Label
ecoFACTS declares that the MX822ST supports the effort to replace hazardous substances by improving material selection, packaging design, energy-saving design and other aspects of the product. The MX822ST includes arsenic-free optical glass, BFR/PVC-free casing plastics and PVC-free plastic packaging.
Multiple Picture Modes
The projector is equipped with six picture modes including Dynamic, Presentation, sRGB, Cinema, User 1 (custom) and User 2 (custom).

Item Includes

BenQ MX822ST XGA Multi-Region 3D Ready DLP Projector

  • Lens Cover
  • Remote Control with Battery
  • Power Cord
  • VGA (D-Sub 15-Pin) Cable
  • User Manual CD

Specefications

BenQ MX822ST Specs

Image Display
Display SystemDLP
Native Chip Resolution1024 x 768(XGA)
Supported ResolutionsVGA - 640 x 480
UXGA - 1600 x 1200
Max Brightness3500Lumens
Offset130%5%
Aspect RatioNative:4:3
Contrast Ratio13000:1
DLP Link 3DYes
ScanHorizontal:31 to 102 kHz
Vertical:50 to 120 Hz
Lens
Lensf/2.8 (f = 7.26mm)
Throw Ratio0.62:1 (78" @ .99m)
Projection Size55 - 87" / 139.70 - 220.98cm
Features
Keystone CorrectionVertical: 30
Ceiling MountableYes
Input/Output Connectors
Inputs/Outputs1 x HDMIAudio/Video (Input)
2 x VGA (DE-15)Video (Input)
1 x Composite (RCA)Video (Input)
1 x S-Video (4-Pin DIN)Video (Input)
2 x 1/8" (3.5 mm) MiniAudio (Input)
1 x RCA Stereo (L/R)Audio (Input)
1 x 1/8" (3.5 mm) MiniAudio (Output)
1 x VGA (DE-15)Video (Output)
1 x Ethernet (RJ45)LAN
2 x USBType-A Female
1 x Mini-USBType-B Female
1 x RS-232C (Unspecified Connector)Control
1 x 12 V TriggerControl
General
Lamp Power310W
Expected Lamp LifeMedium Brightness:2500 Hours
Low Brightness:3000 Hours
Low Brightness:3500 Hours
Fan NoiseMedium Brightness:40 dB
Low Brightness:38 dB
SecurityCable Lock Slot
Power ConsumptionMedium Brightness:370W
Standby Mode (Lamp Off):<0.5W
Dimensions (W x H x D)13.0 x 5.1 x 9.8" / 330.2 x 129.5 x 248.9mm
Weight8.6lb / 3.9kg
Packaging Info
Package Weight12.7 lb
Box Dimensions (LxWxH)15.3 x 12.7 x 10.0"