Skip to content
Apply Promo Code: 3OFF to Enjoy 3% Off on All Products (Exclude Massage Chairs)
Apply Promo Code: 3OFF to Enjoy 3% Off on All Products (Exclude Massage Chairs)
Panasonic AW-RP150 Touchscreen Remote Camera Controller - NJ Accessory/Buy Direct & Save

Panasonic AW-RP150 Touchscreen Remote Camera Controller

SKU AW-RP150
$4,720.00 - $4,720.00
$4,720.00
$4,848.06
$4,848.06 - $4,848.06
$4,848.06
  • Control up to 200 Compatible PTZ Cameras
  • Serial Control 5 Cameras Directly
  • Zoom/Focus Rocker Joystick
  • Touch Panel GUI, Touch Focus & More

STEP 1

Product Selection

STEP 2

Contact Information

STEP 3

Review Information

Panasonic AW-RP150 Touchscreen Remote Camera Controller

Enter the details below to request your custom quote in just a few minutes

Our Customers & Partners

Features

  • Panasonic AW-RP150 Touchscreen Remote Camera Controller

    Panasonic's Touchscreen Remote Camera Controller allows you to control up to 200 compatible Panasonic PTZ cameras over IP via a switching hub. Or you can control five cameras via direct RS-422 connection. Please see the list of supported cameras in the Features section below. The controller features a zoom/focus rocker on the joystick for pan and tilt operations, many onboard buttons, and additional controls within the 7" touchscreen LCD. It also has an SD card slot, which allows saving scene files, system settings files, and other camera settings as well as copying settings over to other cameras. The controller can be powered over Power-over-Ethernet or a 12V, 4-pin XLR power supply, sold separately.

Item Includes

  • Panasonic AW-RP150 Touchscreen Remote Camera Controller
  • Batteries & Power (Not Included)

Specefications

  • General
    Power Requirements 12 V DC (10.8 V to 13.2 V)
    PoE+ IEEE802.3at standard: DC 42 V to 57 V (Camera Input)
    Current Consumption 1.0 A (Connector Input)
    0.6 A (PoE+ power supply)
    Ambient Operating Temperature : 0 °C to 40 °C (32 °F to 104 °F)
    Allowable Humidity 20% to 90% (no condensation)
    Storage Temperature –20 °C to 50 °C (–4 °F to 122 °F)
    Weight Approx. 3.2 kg (7.05 lb)
    Dimensions (W x H x D) 342 mm x 178 mm x 245 mm (13-15/32 inches x 7 inches x 9-21/32 inches)
    (excluding protrusions)
    Connection
    Supported
    Equipment    		 IP/RS422
    AW-UE150W/K
    AW-HR140
    AW-HE130W/K
    AW-HN130W/K
    AW-UE70W/K
    AW-UN70W/K
    AW-HE40 Series
    AW-HN40HW/HK
    AW-HE38HW/HK
    AW-HN38HW/HK
    Input/Output Connectors
    Input: DC 12 V IN XLR 4-pin
    Input: 3G-SDI IN SMPTE292 / 75 Ω (BNC x 1)
    Supported formats:
    1080/59.94p*2, 1080/50p*2,
    1080/59.94i, 1080/50i, 1080/23.98p,
    1080/25p, 1080/23.98PsF, 1080/25PsF
    Output: ACTIVE THRU OUT SMPTE292 / 75 Ω (BNC x 1)
    Input/Output: IP CONT 100BASE-TX
    PoE+ input
    Connection cable: LAN cable, max. 100 m (328 ft)
    • When connecting the unit via a switching hub:
    Straight cable or a cross cable (category 5 cable), STP (Shielded
    Twisted Pair) cable recommended
    • When connecting the unit directly: Crossover cable (category 5
    cable), STP (Shielded Twisted Pair) cable recommended
    Input/Output: SERIAL CONT (RJ-45) RS-422 (control signals for remote cameras), TALLY OUT
    Connecting cable:
    Straight cable (category 5e or better shielded cable),
    max. 1000 m (3280 ft)
    TALLY OUT: Open collector output (negative logic)
    Maximum voltage resistance DC 24 V, Maximum current 50 mA
    Input/Output: TALLY/GPIO 1 D-sub 25-pin, female, inch thread
    TALLY IN : 10 inputs (for receiving photocoupler signals)
    GPI : 6 inputs (for receiving photocoupler signals)
    GPIO : 5 inputs (for receiving photocoupler signals)
    or 5 outputs (open collector outputs, negative logic)
    • Input/output switched with menu settings
    Input/Output: GPIO 2 D-sub 25-pin, female, inch thread
    GPI : 10 inputs (for receiving photocoupler signals)
    GPIO : 10 inputs (for receiving photocoupler signals)
    or 10 outputs (open collector outputs, negative logic)
    • Input/output switched with menu settings
    Reserve connectors:
    2 connectors (For future expansion feature)
    LCD Display 7-inch Touch Panel GUI Monitor (WVGA (800×480))
    SD Memory Card Slot SDHC / SDXC Memory Card Slot x 1
    Connection Specifications
    No. of Connectable Cameras 200 (IP), 5 (RS422)
    No. of Camera Selection Buttons 10
    No. of Camera Groups 20 (10 units per 1 group)
    Memory
    Preset Memory No. of memory presets: 100
    Tracing Memory: No. of cameras  
    Tracing Memory: Recording time, no. of memory settings Maximum 5 min. total per camera, maximum of 10 settings per camera
    Other Functions
    No. of User Assignable Buttons 6 + up to 10 on the LCD menu
    Pan / Tilt Speed Adjustment 7 levels
    Tally LED Display Color green / red